Notes:

Board Zip File contains all information neccessary
to manufacture a PCB

Report Zip File contains all informational reports 
such as BOM.

Design Zip File contains all information required
to modify the schematic & board layout using Orcad V7.0x

R1 Files are for Revision 1 
R2 Files are for Revision 2 

Revisions : RMI350 Rev2

Added DB9 Connector to route signals from TNC to main board. 
Added Mounting holes for standoffs from rear of case to provide
additional structural support.

Note: RMI350 Rev1

The Samtec Connector is mounted on the Solder Side.