             
              DOWN LOAD A S19 RECORD RUNNING BUFFALO MONITOR 
                      WITH MAXTALK PC COMMUNICATION

	Procedure:               

	  - Connect the RS-232 cable to the terminal, and apply +5v on
            NMI board.
          - At the Dos prompt type MAXTALK (assume you are using com1)
            then press RETURN key.
          - Type H for HELP (it will display BUFFALO commands on screen).
          - At the Buffalo prompt '>' type LOAD T, then press RETURN.
          - Now press [CTRL+C] to exit maxtalk.
          - At the DOS prompt type COPY FILENAME.S19 COM1: .
          - When the DOS prompt is ready, type MAXTALK.
          - Do a reset (do not turn power OFF then ON for reset).
          - Press RETURN to get BUFFALO prompt '>'.
          - At the BUFFALO prompt '>' type G <code address>, 
               for example: G C0F0 (for CLOCK1.C);
            then press RETURN. The program  will be automatically 
            executed.